Plumbing - DWV ABS
This has a list of all the ABS parts I use in my DWV piping.
Main 4" house sewer pipe
4x4-Long-turn-90-bend
Used at bottom of vertical 4"
sewer stacks
Mueller Industries 02874H 4"L Sweep 90DEG HxH Ell
http://www.ronshomeandhardware.com/02874H-4-L-Sweep-90DEG-HxH-Ell-p/749317.htm $8.89
4x4x4-Cleanout
http://www.ronshomeandhardware.com/02942H-4-MPT-Plug-p/419606.htm $3.30
4x4x4x4-Wye
Used when the main sewer from the house enters the building. The
center leg is used for a cleanout.
Nibco ABS DBLY4
4" ABS DWV
Plastic Fittings 45° Double Wye H x H x H
http://www.zoro.com/i/G2972742/?utm_source=google_shopping&utm_medium=cpc&utm_campaign=Google_Shopping_Feed&gclid=CLW4iZjticECFRFffgoddHgAlw
$46.08
http://www.faucetdepot.com/prod/4%22-ABS-DWV-Plastic-Fittings-45°-Double-Wye-H-x-H-x-H-151426.asp
$55.22
4x4-45-bend
Used for joggles
Mueller Industries 02888H
4"45DEG HxH 1/8Bend Ell
http://www.ronshomeandhardware.com/02888H-4-45DEG-HxH-1-8Bend-Ell-p/415372.htm $5.57
http://www.zoro.com/i/G2522152/?category=5774
$6.96
4x4-22.5-bend
Used in the main horizontal sewer pipe
Mueller Industries 02983H 4" 22-1/2DEG HxH Ell
http://www.ronshomeandhardware.com/02983H-4-22-1-2DEG-HxH-Ell-p/240291.htm $6.41
4x4-pipe-coupler
Couple 4" pipes into longer lengths
Mueller Industries 02936H 4" HxH Coupling
http://www.ronshomeandhardware.com/02936H-4-HxH-Coupling-p/419614.htm $2.79
http://www.zoro.com/i/G0722434/?category=5774
$3.77
Branching off from the stack
4x4x3-Wye-45
Used to connect one 3" horizontal branch to the 4" sewer stack, particularly when need to come out at an angle from a corner (which is the normal case). Whenever possible (and when there is vertical height available (eg in basement or when there is a wall that can be used)) use two branches one above another, but for the one below it is better to use a Wye then pipe then a 45 degree. Do this even if not needed today because it allows for future expansion,
Mueller Industries 02864H 4x4x3 L Turn Tee Wye
http://www.ronshomeandhardware.com/02864H-4x4x3-L-Turn-Tee-Wye-p/493403.htm
$14.33
http://www.zoro.com/i/G3160245/?category=5774
$15.73
4x4x3-Wye
Used for a connection from the 4" sewer stack when there is already a branch off above for the floor. This one relies on using the wall to hide the pipe. It connects to a piece of 3" pipe upwards to floor height and then a 3x3-45-bend at ceiling height.
Mueller Industries 02830H 4x4x3 HxHxH Redu Wye
http://www.ronshomeandhardware.com/02830H-4x4x3-HxHxH-Redu-Wye-p/303099.htm $10.56
3x3-45-bend
Used for connecting from stack in the lower case and for joggles.
Mueller Industries 02887H
3"45DEG 1/8 Bend Ell
http://www.ronshomeandhardware.com/02887H-3-45DEG-1-8-Bend-Ell-p/324582.htm $3.57
http://www.zoro.com/i/G1346983/?category=5774
$4.11
4x4x3x3-Double-Wye
Can be used to connect two 3" horizontal branches to the 4" sewer stack if they are in opposite directions. It can be nice as it provides for future expansion. In practice using this can be difficult in the concrete corner where the stacks are usually positioned. Also it does not work well when needing to come off in a particular direction. The branches connect to lengths of 3" pipe at 45 degrees and then to 3x3-45-bends when it gets to in0ceiling height.
NIBCO Model # C5834HD4433 Internet # 100178347 Store SKU # 134683 4 in. x 4 in. x 3 in. x 3 in. ABS DWV All-Hub Double Wye
http://www.homedepot.com/p/NIBCO-4-in-x-4-in-x-3-in-x-3-in-ABS-DWV-All-Hub-Double-Wye-C5834HD4433/100178347?N=5yc1vZbqog $23.96
http://www.nibco.com/Fittings/Plastic-Fittings/ABS-DWV-Fittings/5834-45-Double-Wye-Hub-ABS-DWV/
3x3x3-Wye
Used when one 3" branch needs to serve two toilets. Not a bad idea to include for future expansion even if no current plans for a second toilet.
Mueller Industries 02824H 3" HxHxH Wye
http://www.ronshomeandhardware.com/02824H-3-HxHxH-Wye-p/144477.htm
$6.73
3x3-Long-turn-90-bend
Used under toilet.
Mueller Industries 02873H 3"L
Sweep HxH 90DEG Ell
http://www.ronshomeandhardware.com/02873H-3-L-Sweep-HxH-90DEG-Ell-p/511097.htm $5.34
4x4x2-Wye-45
Used to connect the drain from an isolated
sink into the 4" sewage stack. Not a particularly common case
because usually a 3" branch is used.
Mueller Industries 02863H 4x4x2L
TurnHxHxH TeeWye
http://www.ronshomeandhardware.com/02863H-4x4x2L-TurnHxHxH-TeeWye-p/749358.htm $12.45
Branching off 3" branch for smaller fixtures
3x3x2-Wye-45
Used to provide drainage of non-toilet fixtures into the toilet 3"
pipe
Mueller Industries 02857H 3x3x2 L Turn Tee Wye
http://www.ronshomeandhardware.com/02857H-3x3x2-L-Turn-Tee-Wye-p/511212.htm
$5.93
http://www.zoro.com/i/G1911122/?category=5774
$6.52
http://www.homedepot.com/p/NIBCO-3-in-x-3-in-x-2-in-ABS-DWV-Hub-x-Hub-x-Hub-Long-Radius-Sanitary-Tee-C5812LHD332/100345360?N=5yc1vZbqog
$6.01
3x3x2-Wye
Used to branch off for sink and for toilet venting.
http://www.ronshomeandhardware.com/02828H-3x3x2-HxHxH-Redu-Wye-p/511105.htm $4.54
2" branches
2x2x2-Sanitary-Tee-Female-Male
Used to pickup
horizontal arms from p traps from floor drains and showers.
Mueller Industries 03113H 2" Spgxhxh San
Str Tee
http://www.ronshomeandhardware.com/03113H-2-Spgxhxh-San-Str-Tee-p/278358.htm $4.98
2x2x1.5-Sanitary-Tee
Used to pickup horizontal arms from p traps from bathroom sinks.
http://www.ronshomeandhardware.com/02758H-2x2x1-1-2-HxHxH-San-Tee-p/511030.htm $2.04
2x2-Long-turn-90-bend
Used at base of wall for a bathroom sink.
http://www.ronshomeandhardware.com/02872H-2-L-SweepHxH-90DEG-Ell-p/421081.htm
$2.59
Vent pipes
2x2-90-bend-Female-Male
Best bet for vent at top of
Sanitary-Tee
Mueller Industries 02881H 2" 90DEG SpgxH Str Ell -
Quantity 5
http://www.ronshomeandhardware.com/02881H-2-90DEG-SpgxH-Str-Ell-p/146001-5.htm $13.14 for 5
2x2-90-bend
Best bet for vent pipe corners as
less expensive and more compact than long sweep.
Mueller Industries 02877H 2" 90DEG
HxH Ell
http://www.ronshomeandhardware.com/02877H-2-90DEG-HxH-Ell-p/324103.htm $1.83
http://www.zoro.com/i/G3249373/?category=5774
$1.91
2x2x2-Sanitary-Tee
Least expensive way to connect
vertical vent pipes into the 5' high horizontal vent
Mueller
Industries 02753H 2" HxHxH San Tee
http://www.ronshomeandhardware.com/02753H-2-HxHxH-San-Tee-p/142729.htm $2.24
http://www.zoro.com/i/G2679747/?category=5774
$2.45
http://www.homedepot.com/p/NIBCO-2-in-ABS-DWV-Hub-x-Hub-x-Hub-Sanitary-Tee-C5811HD2/100347862?N=5yc1vZbqog
$2.60
3x3-45-bend-Male-Female
Not actually very useful because Wyes with 45 degree outlets
typically require a length of pipe at 45 degrees before doing the 45
degree turn to horizontal, so you actually need all hub 45 degree bends.
Mueller Industries 02892H 3" 45DEG SpgxH Str Ell
http://www.ronshomeandhardware.com/02892H-3-45DEG-SpgxH-Str-Ell-p/145888.htm $3.18
http://www.zoro.com/i/G2353942/?category=5774
$3.72
http://www.homedepot.com/p/NIBCO-3-in-ABS-DWV-45-Degree-Hub-x-Hub-Street-Elbow-C58062HD3/100344941
$2.91
1.5x1.5-90-bend-Female-Male
Used into swivel ABS
Mueller Industries 02880H 1-1/2" 90DEG Street Ell
http://www.ronshomeandhardware.com/02880H-1-1-2-90DEG-Street-Ell-p/145979.htm $1.67
1.5x1.5-45-bend
Used for joggles
Mueller Industries 02885H
1-1/2 45DEG HxH Ell
http://www.ronshomeandhardware.com/02885H-1-1-2-45DEG-HxH-Ell-p/324251.htm $1.54
http://www.zoro.com/i/G2894963/?category=5774
$1.13
2x2-45-bend
Used for joggles
Mueller Industries 02886H 2"
45DEG HxH Ell
http://www.ronshomeandhardware.com/02886H-2-45DEG-HxH-Ell-p/324285.htm $1.86
http://www.zoro.com/i/G0583527/?category=5774
$1.68
2x1.5-Reducer
Used to connect 2" pipe into 1.5" hair
trap
Mueller Industries 02948H 2x1-1/2HxH ReduCoupling
http://www.ronshomeandhardware.com/02948H-2x1-1-2HxH-ReduCoupling-p/749275.htm $1.95
http://www.zoro.com/i/G3142745/?category=5774
$1.44
2x2-pipe-coupler
Couple 2" pipes into longer lengths
Mueller Industries 02934H 2" HxH Coupling
http://www.ronshomeandhardware.com/02934H-2-HxH-Coupling-p/323733.htm $1.32
http://www.zoro.com/i/G2876212/?category=5774
$0.80
3x3-pipe-coupler
Couple 3" pipes into longer lengths
Mueller Industries 02935H 3" HxH Coupling
http://www.ronshomeandhardware.com/02935H-3-HxH-Coupling-p/323907.htm $1.96
http://www.zoro.com/i/G0548877/?category=5774
$2.22
3x3-22.5-bend
Get to the right horizontal direction
Mueller Industries 02901H 3" HxH 22-1/2DEG Ell
http://www.ronshomeandhardware.com/02901H-3-HxH-22-1-2DEG-Ell-p/511139.htm $5.61
2in-cleanout
Used for Vent cleanout
Mueller Industries
02998H 2"HxHxFPT CleanOut Tee
http://www.ronshomeandhardware.com/02998H-2-HxHxFPT-CleanOut-Tee-p/511014.htm $5.28
1.5x1.5-Swivel-screw-connector
Connect to hair traps.
Already got from Zoro
Mueller Industries 53421 1-1/2"HxFPT
SwivAdapter
http://www.ronshomeandhardware.com/53421-1-1-2-HxFPT-SwivAdapter-p/749416.htm
$2.33
Toilet Flange
NIBCO 4 in. x 3 in. ABS DWV Adjustable
Closet Flange
http://www.homedepot.com/p/NIBCO-4-in-x-3-in-ABS-DWV-Adjustable-Closet-Flange-C58512AHD43/100346675?N=5yc1vZbqog
$10.47
2in-cleanout-thread-male
Used to make 2" hair traps.
Mueller Industries 02928H 2" HxMIP Male Adapter
http://www.ronshomeandhardware.com/02928H-2-HxMIP-Male-Adapter-p/186692.htm
$1.75
2in-cleanout-plug
Used to make 2" hair trap
Nibco ABS CAPFIP2
http://www.faucetdepot.com/faucetdepot/ProductDetail.asp?Product=151408&AffiliateID=GoogleDirectFeed&gclid=CjwKEAjwwJmhBRC56KOelNOXhxUSJAB_w2uNBmtFwaB5VbP6K6F6iYNR5dJaRFNSzlCT7580A5Rf9BoCh6vw_wcB
$3.86