Header
Carnation Construction
Contact Dave
Carnation
T-06-05 Page loading indicator

Home Site Map - Techniques - Electrical -

Electrical Conduit

Star Provisioning your yard for external lights and power outsets using conduit.

 

Put in lots of conduit

When digging a trench it is worth adding lots of spare conduit.  This picture shows the first set of conduit.

Spare electrical conduit

The following picture shows the second layer of conduit (almost all 2" diameter).

Second set of conduit at main panel 

In terms of diameter for your money, 2" schedule 40 conduit is a good choice because it is sold in high volume and that keeps the price down.  A 10 foot length of 2" conduit is about $6.  You can just about pull 4 wires of 2/0 diameter each through a 2" diameter conduit.  In my case I have four runs of 2" diameter conduit from the main panel to the house.

Electrical conduit 2in Electrical Conduit 2in

Make sure you label all your conduit because it's easy to forget where they all go.

Label all the conduit 

It is best to use purple primer (before the PVC glue) on the conduit even though this is not required by code.  You can use the same glue as for white PVC water pipe.  I use regular strength clear (potable water) PVC glue for both.

It is very difficult to fit additional wires down conduit that already has wires.  At minimum you will need to pull the existing wires out and pull through a combined bundle that has both the new and old wires.  In most cases it is just easier to lay additional conduit in parallel with the old conduit.  You will be digging in already disturbed soil so digging the trench for the additional conduit is easy.

For lighting in the yard, I use 3/4" conduit because it only needs thin wires (12 gauge)...

Electrical conduit 3/4inElectrical Conduit 3/4"

 

Electrical boxes in the yard

My favorite electrical junction box for use in the yard is 6"x6"x4" and made of thick rigid plastic with a good rubber sealed screw on lid.  Bigger ones use the same wall thickness so as the size increases they easily distort.  The box I like comes without any conduit connects so you can make the holes using a jigsaw and a rasp wherever you like.  I use a male plastic screw connector mated with a female plastic screw connector on the inside of the box.  I use plenty of PVC glue all round the plastic threads and where they join the box.  It makes it nice and waterproof.

Electrical box 6in x 6in x 4inElectrical box 6in x 6in x 4in

Electrical Junction Box With Connectors